FL - Manual Front Loader
A single-robot welding cell for small to medium parts, with a manually indexed wall that lets your operator load at the front while the robot welds behind it.
- Two tables, one manual wall. Two fixed tables rotate 180° on a manually indexed wall that shields the operator from sparks and UV light.
- Built to RIA safety standards. A circular guard matching the wall's swing keeps the operator out of its path.
- Sized for small to medium parts. A modular design built for compact, repeatable work.
- Room to grow. Each table can be enlarged or fitted with a one- or two-axis positioner for complex weld paths.
- Easy to service. Doors on both sides give direct access for maintenance.
- Ready to install. A combined skid and trailer carries the controller, power and wire supply, and water cooler, with wiring paths built in.
Cell footprint
| Dimension | Imperial | Metric |
|---|---|---|
| Length | 113″ | 2.87 m |
| Width | 66″ | 1.68 m |
| Height | 90″ | 2.29 m |
Table Dimensions
| Dimension | Imperial | Metric |
|---|---|---|
| Length | 39.5″ or 23″ | 1.00 m or 0.58 m |
| Width | 16″ or 19″ | 0.40 m or 0.48 m |
| Load height | 30″ | 0.76 m |
Compatible with any major brand of six-axis robotic arm up to 1600 mm reach. Each table can be enlarged or fitted with a one or two axis positioner where weld path geometry requires it.
The cell ships on a combined skid and trailer. The controller, power and wire supply, and water cooler ride on the protected trailer with wiring paths already built in, so the cell arrives ready to place rather than as loose components.
Doors on both sides give direct access for maintenance, and the modular design means each table can be enlarged or fitted with a one- or two-axis positioner as your parts change. Our team installs the cell, trains your operators, and stays available for troubleshooting and adjustments after start-up.
Warranty terms are provided with every quote. Contact us for details.
Open M–F from 7 AM to 4:30 PM
Category
Related products
FT20
FT20 - 2-Door Fixed Table
FT30
FT30 - 3-Door Fixed Table
AL20
AL20 - 2-Door Angle Loader
FL1
FL1 - 1-Axis Front Loader
FL3
FL3 - 3-Axis Front Loader
SL
SL - 2-Axis Side Loader
Join other manufacturers like you who've already cut cycle time in half.
Side loading 1600mm pre-engineered cell with modular tooling.
Custom press tool to fix inconsistencies in tank assemblies.
Custom welding cell for ground turbine components purpose-fit into existing walls.
Tailored solutions for seamless integration of robotic welding systems into your production line.
Enhancing manufacturing efficiency through advanced robotic welding technology.
Your first robotic welding project doesn't have to be a guess.
Get a personalized on-site assessment so you know what it takes before you invest a single dollar.